Cut fire 100i mit Flash 101

Cost-efficient cutting with air

With the new plasma inverter CutFire 100i and the corresponding torch Flash 101users benefit in many ways from using air for plasma cutting as far as simple mechanised cutting applications are concerned. In addition to cooling of the inverter and torch, the air that rotates around the plasma beam stabilises the arc and ensures a better protection and cooling of the consumables. Thus, the cutting speed is increased, the lifetime of the consumables is improved and the costs per cutting metre are reduced.

PLASMASCHNEIDEN

Swirl gas for more performance
With the torch Flash 101 for the inverter CutFire 100i, the well-proven swirl gas technology is now also used for plasma cutting with air. With only one gas the CutFire 100i cuts material thicknesses of up to 20 mm reliably and can also be used for bevel cutting, marking and piercing

Extract cutting speeds for mild steel

mm	A	Quality mm/min	Maximum mm/min
2	45	4200	6.000
4	45	1.900	2300
4	65	4400	5500
6	65	2850	3700
6	100	4200	5500
8	100	3000	4000
10	65	1100	2000
10	100	2400	3350
12	100	1800	2500
15	100	1200	1800
20	100	750	1100
25	100	500	700
30	100	200	520