Hydraulic Tube Pullers, Suppliers / Exporters, India

Hydraulic Tube Pullers

CPSCK-1000 Conversion Kit

CPSCK-1000 conversion kit is designed to convert the CP-1000 and SP-1000-S into the short spear type tube puller allowing the user to rapidly extract ferrous, non-ferrous and alloy tubing & stubs from heat exchangers, chillers, condensers and similar thermal exchange equipment.

Capacity from 1/2” to 1” O.D. of any gauge up to the units 15 Ton Capacity (12 to 25 mm O.D. any wall thickness up to the units 15T Capacity) from tube sheet up to 2,25” (57 mm).

Utilizing economical short spear technology, our patented extraction system, automatically grips and releases the spear at the end of its cycle.

Tube Puller CPS-1000

Our short spear type puller has been designed to pull ferrous, non-ferrous and alloy tubing & stubs from heat exchangers, chillers, condensers and similar thermal exchange equipment. Capacity from 1/2” to 1” O.D. of any gauge up to the units 15 Ton Capacity. (12 to 25 mm O.D. any wall thickness up to the units 15T Capacity) from tube sheet up to 2,25” (57 mm)

Utilizing economical short spear technology, our patented extraction system, automatically grips and releases the spear at the end of its cycle.

This system is simple and cost efficient to own & operate, due to the small amount of consumable required to extract a tube when compared to other pulling technologies.

Tube Puller CP-1000-FF

This unit has all the features of our Standard Model CP-1000 with the additional advantage of being able to remove stubs from the waterbox of Fin Fan Coolers as well as tubes/stubs close to the shell or pass partition plates within thermal exchange units. A standard waterbox depth of X is furnished with custom depths available upon request. Capacity from 5/8” to 1-1/2” O.D. gage 16 to 38 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm).

Tube Puller CP-1000-CC

This is our lightweight unit, specifically designed for the condenser and chiller markets. An ideal tool for working within the waterbox of a surface condenser or within the channel head of a chiller, you can remove 4-6 tubes a minute quickly and effortlessly. Capacity from 5/8” to 1” O.D. gage 16 to 24 (16 to 25 mm O.D. wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm).

Tube Puller CP-1000-S

This is a Shortened version of our model CP-1000. This unit has been designed to remove both ferrous and non-ferrous tubing from condensers, chillers and heat exchangers. Capacity from 5/8” to 1-1/2” O.D. gage 16 to 24 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) from tube sheet up to 2” (50 mm).

Tube Puller CP-1000

This unit has been designed to remove both ferrous and non-ferrous tubing from condensers, chillers and heat exchangers. Capacity from 5/8” to 1-1/2” O.D. gauge 16 to 24 (16 to 38 mm O.D. wall 0,5 to 1,6 mm) for tube sheets up to 2” (50 mm).

D-3055-7 RAM Chair

Nulla consequat massa quis enim. Donec pede justo, fringilla vel, aliquet nec, vulputate eget, arcu. In enim justo, rhoncus ut, imperdiet a, venenatis vitae, justo. Nullam dictum felis eu pede mollis pretium. Integer tincidunt. Cras dapibus.

D-3055-1 Load Cap

D-3055-4 Horse Shoe Lock

D-3055-5 Male x Male Adaptor

D-3055-6 Male x Female Adaptor

D-3055-3D Double Adaptor

D-3055-2 Single Pull Adaptor

Tube Spear For HPR Tube Puller

HPR-30 Tube Puller

Our model HPR-30 is a Heavy duty, 30 Ton Pulling Ram. This tool has been engineered with a 6’’ Pull Stoke for tough tube removal applications. It is fitted with flush face, non-drip, couplings and its own custom suspension and handling bracket. In conjunction with our Double Pull Adaptor, this Puller has the captivity to pull the tube 9’’ from the tube sheet, (see Pulling Spear Selection).

Super Jenny Hydraulic Semi-Automatic Tube Puller

Our Super Jenny Series of Hydraulic Semi-Automatic Tube Pullers, allows the user to continuously pull tubes through heat exchangers, condensers and boilers, without the use of hammers or winches etc. The key to our system is the OD gripping jaw that will pull the tube as the operator actuates the ram. To release the jaw, the operator simply inserts the jaw release tool and the tube becomes free to be pulled by hand, or the ram is returned against the tube sheet to take another stroke. All of our pulling heads work in conjunction with our specially designed high flow electric or pneumatic power packs.

Tube Puller Pump

Our Hydraulic Pumps have been designed to exacting standards to provide the maximum productivity from a lightweight pump, specifically designed for tough tube pulling Applications.

Standard features:
– Two Speed Pump for High Performance
– Light Weight and Portable
– Safe Cage as Standard
– 10 ft. Remote Pendant
– 2-1/2 Gallon (9,5 liter) Metal Reservoir
– Large Pressure Gauge

Spears RAV400 Pulling Equipment